GX螺旋输送机

周先生 13906278080 丁宝勤 13906276368

电话：0513-88400999 传真：0513-88400998 邮箱：jszk@vip.163.com

一、概述
GX型螺旋输送机是利用螺旋转动将物料沿机壳连续推移而进行输送的。本机具有结构简单，外形尺寸小，成本低，操作安全，能按工艺要求满足多点进料和排料。
.Brief introduction
Type GX Screw Conveyor is conveyed material by screw rotation along shell. It is characterized by simple structure, small outline size, low cost and safe operation. Inlet and outlet at many points according to workmanship request.

二、技术性能与技术参数
Technical capacity and technical parameter

规格{Specification}		主要技术性能(Main technical capactity)		驱动装置(Driving device)				重量 (Weight) (kg)
直径 (Diameter)	长度 (Length) (m)	产量(水泥} (吨/时）Output (cement) t/h	转速 (转/分）Speed (r/min)	减速机(Reducer)		电动机{Motor}
直径 (Diameter)	长度 (Length) (m)	产量(水泥} (吨/时）Output (cement) t/h	转速 (转/分）Speed (r/min)	型号(Type)	速比(Ratio)	型号(Type)	功率(kw) (Power)
QX200	〜10	9	60	JZQ250	23. 34	Y90S—4	1. 1	726
GX200	〜20	9	60	JZQ250	23. 34	Y90L—4	1.5	1258
GX250	〜10	15.6	60	JZQ250	23. 34	Y100L—4	2. 2	960
Gx250	〜20	15.6	60	JZQ250	23. 34	Y100L—4	3	1750
GX300	〜10	21.2	60	JZQ350	23. 34	Y100L—4	3	1373
QX300	〜20	21.2	60	JZQ350	23. 34	Y112M—4	4	2346
GX400	〜10	51	60	JZ0400	23. 34	Y132S—4	5. 5	1911
GX400	〜20	51	60	JZQ500	23. 34	Y160M—4	11	2049
Gx500	〜10	87.5	60	JZQ400	23. 34	Y132W—4	7. 5	2381
GX500	〜20	87.5	60	JZQ650	23. 34	Y180W—4	18. 5	5389
Qx600	〜10	134.2	45	JZQ750	23. 34	Y180L—4	22	3880
Gx600	〜10	134.2	45	JZQ850	23. 34	Y250M—4	55	7090

三、GX型螺旋输送机的制法和装法说明

GX螺旋机按使用场合要求的不同，分为S制法和D制法两种。

　　 S制法一带有实体螺旋面的螺旋，其螺距等于直径的0. 8倍。

　　 D制法一带有带式螺旋面的螺旋，其螺距等于直径。

　　GX螺旋机按驱动装置装配方法的不同，分为右装和左装两种：

　　右装一站在电动机尾部向前看，减速器低速轴在电动机的右侧。

　　左装一站在电动机尾部向前看，减速器低速轴在电动机的左侧。

　　GX螺旋机的出料口有方形出料口、手推式出料口和齿条式出料口三种。后两种出料口拉板的开闭方向，随安装不同而分右装、左装两种：

　　右装一站在螺旋机头节往尾节看，拉板向右拉开。

左装一站在螺旋机头节往尾节看，拉板向左拉开。

Fabrication and installation of type GX Screw Conveyor
Type GX Screw Conveyor has S and D types according to applied condition.
Type S~with screw of hypostatic screw surface, the pitch is equal to 0.8 times of diameter.
Type D~With screw of screw surface, the pitch is equal to diameter.
Type GX screw conveyor has right and left assemble way according to different assembling way.
Right assemble-Stand in the tail of motor and look forward, low speed shaft of reducer is on the right of motor.
Left assemble-Stand in the tail of motor and look forward, low speed shaft of reducer is on the left of motor. Outlet mouth of type GX screw conveyor has square outlet, hand drawing outlet and gear outlet. The direc-tion of rear two outlet plates has right and left assembling.
Right assemble—Stand on head part of screw conveyor and look tail part, drawing plate is to the right.
Left assemble—Stand on tail part of screw conveyor, drawing plate is to the left.