WCF-Z/X物料调节闸门（空气输送斜槽截流阀）

物料调节闸门是我公司根据气力输送工况需求研制的一种调节、切断型闸门，广泛适用于建材、冶金、矿山、轻工、玻璃等行业的气力输送系统。

Material adjustable valve is a newest adjustable, cut-off valve according to pneumatic conveying work condition. It is widely used in building material, metallurgical, ore, light industry and glass etc. pneumatic conveying industry.

结构特点：
        物料调节闸门采用优质碳钢焊接而成，分上下两个通道，下通道为充气层，上通道为输送物料层，中间为透气层。螺旋型闸板可任意调节闸门开度，特别适用于无粘度的干燥粉料，细微颗粒料等。具有能耗小、无噪音、无污染，少维修、无卡阻、操作方便、使用寿命长等特点。

Structure features
        Material adjustable valve is welded with excellent carbon. It has two passages which is up and down. The down layer is aerating layer, up layer is conveying material and the middle layer is ventilated layer. Screw gate can adjust the open of valve freely, especially clay less and dry material, fine grain material etc. It is characterized by low consumption, no noise, no pollution, small maintenance, no blockage, convenient operation and long life etc.

性能参数(Structure features)

工作原理：
        物料调节闸门由风机给予低压小容量空气经下通道入气口充气层充气，气体透过沸腾板均匀向上喷吹，鼓动物料向上位移，物料自重下落时由设备安装斜度而产生位移，不断重复致使物料向前位移。调节闸门由丝杆闸板及密封副等组成，由人工转动手轮带动丝杆旋转，使闸门随着螺旋丝杆产生位移，起到任意调节或切断的作用。
Work principle
        Material adjustable valve is given small air through air inlet passage from aerating layer by the fan. Air is sprayed through boiling plate upward, make material upward. Material will move and fall with the gravity because of slope, moving forward again and again. Adjustable valve is made up of screw gate of silk pole and sealing pairs etc. It is rotated hand wheel in hand driving silk pole. Screw silk pole will move and adjust or cut off it. 

使用说明：
        安装前请检查闸门内腔有无杂物附着，沸腾板受潮没有，如沸腾板受潮请更换后再进行安装，否则影响使用效果。检查各传动部分是否灵活可靠。法兰间连接需加密封垫片后再均匀拧紧螺栓。调试时，人工转动手轮，顺时针旋转为关，反之为开，运行无卡阻现象即可。

Operation description
        Check screw gate whether there are sundries attachment before installation and boiling plate is moisture. If boiling plate is moisture, change and install it. Otherwise it will have effect on the effect. Check all driving part whether they are sensitive and dependable. Flange connections should add sealing gasket, then tight the bolt.
         When commissioning, rotate the hand wheel in hand. The clockwise rotation is off and counter clockwise rotation is on. If there is no blockage, it is OK.

WCF-Z外形图：                   WCF-X外形图：

WCF-Z/X外形连接尺寸WCF-Z X Outline connection dimension：

订货须知：
选用订货时请参照产品样本注明产品规格、型号及技术参数(使用温度、设备况、介质性质等)。
表格中示列规格、用于特殊介质或其它特殊要求，请与我公司经销部、技术部系，可为您另 行设计、制造。
Notes for order
Please note the specification, type and technical parameter(applied temperature, equipment condition and media character etc.) when placing an order.
The specification not listed in the list is for special media or other special requirement. Please contact with our sales department and technical department. We can supply design and manufacture for the customer.