充气箱

充气箱包装 

        充气箱是水泥工业气动均化装置，用于库内喂送或搅拌粉状物料的设备。适用于各种规格形式的生料库，储存库，混合式均化库，其形状分为矩形、直角梯形、等腰梯形及特殊形 式充气箱四大类。并具有结构简单、性能可靠、无噪音、易维修、搅拌均匀等优点，被广泛 用于水泥行业，是水泥、生料储存搅拌生产工艺不可缺少的设备。
        Aerating case is a pneumatic homogenized device in cement industry. It is used to convey material or pneumatic mixing powder material and all kinds of raw material silo, storage silo, mixing and homogenized silo. The shape has rectangle, right angle trapezoid, isosceles trapezoid and other special shapes etc. It is characterized by simple structure, dependable capacity, no noise, easy maintenance and even mixing etc. It is an important aerating equipment of raw material homogenization in cement and raw material storage.

技术性能
        1、搅拌物料-干燥粉状物料，允许表面积小于1?4;
         2、透气性能-小于3m3/m2 •min;
        3、风压-小于4Kg/cm2 ；
        4、透气层阻力-小于1200Pa;
        5、透气材料-合成纤维混编涤纶透气层。
I.Technical capacity
        1.Mixing material——Dry and powder material, Allowable surface area<1%;
        2.Ventilating capacity <3m3/m2 min;
        3.Wind pressure<4Kg/cm2;
        4.Resistance of ventilated layer<1200Pa;
        5.Ventilated material-Synthetic fibre and terylene ventilated layer.

排列、形状及安装
        充气箱在库内排列时，原则上要求实际排列面积占总面积的比例越大越好，搅拌库和混 合式均化库中心区（搅拌区），对这点要求更为重要，现提供A、B、C、D、E、F六种基本排 列形式供选用。
        A型和B型排列（见图1、图2)适用于<l> 12m以下的水泥或生料混合式均化库，环形区充气 箱向中心区倾斜安装，中心区充气箱水平安装。
        C型排列（见图3)适用于12m以上水泥或生料混合式均化库，环形区充气箱向中心区倾 斜安装，中心区充气箱水平安装。
II.Arrangement, shape and installation
        When aerating case is arranged, fact arrangement covers total area in principle which is the bigger and better. It is important for mixing silo and the center zone of mixture homogenized silo. Now supply six types of A, B, C, D, E and F for your selection.
        Type A and type B arrangement(Figure 1 and figure 2) applies below 012m cement or raw mate¬rial mixture homogenized silo. Circular aerating case is installed and inclined to the center. Aerating case of central zone is installed in horizontal.
        Type C arrangement(Figure 3) applies above 012m cement or raw material mixing homogenized silo. Circular aerating case is installed and inclined to the center zone. Aerating case of central zone is installed horizontally.

D型充气箱排列(见图4)适用于各种规格的水泥或生料储存库，环形区充气箱向中心区倾 斜安装，中心区充气箱水平安装，但中心区较小。
E型排列(见图5)适用于各种规格的水泥或生料储存库和搅拌库，环形区充气箱向中心区 倾斜安装，中心区充气箱水平安装。
F型排列(见图6)适用于各种规格的水泥或生料搅拌库，所有充气箱水平安装。
六种基本排列各有其优缺点及适用范围，设计和使用部门可按实际情况进行选用，充气 箱的分区数量可按实际情况进行，但必须符合四区、六区、八区、十二区的规定。
         Type D arrangement (Figure 4) applies all kinds of specifications cement or raw material storage silo. Circular aerating case is installed and inclined to the center zone. Aerating case of central zone is installed horizontally, but center zone is smaller.
Type E arrangement (Figure 5) applies all kinds of specifications cement or raw material storage and mixing silo. Circular aerating case is installed and inclined to the center zone. Central aerating case is installed horizontally.
Type F arrangement (Figure 6) applies all kinds of specification cement or raw material silo. All aerat-ing case is installed horizontally.
Six arrangements have themselves shortcomings, advantages and applied range. The design and used department can select according to the fact condition. The divided zones of aerating case may go on according to the fact condition. But it should comply with the regulations of 4 zones, 6 zones, 8 zones and 12 zones.

订货须知
订货需注明均化库规格、充气箱外形尺寸，或提供库底布置草图，为用户特殊设计制造。
Notes for order
Note the specifications of homogenized silo, outline size of aerating case or supply sketch of bottom silo arrangement. Design and manufacture them for the user especially.