咨询热线: 0513-88400999

电站辅机

PSZ砂石整形机

周先生 13906278080 丁宝勤 13906276368

电话:0513-88400999 传真:0513-88400998 邮箱:jszk@vip.163.com

 PSZ砂石整形机



产品描述 Product description
       PSZ系列砂石整形机是我公司技术人员研发的新型设备,适用于抗压强度在300MPa以下的各种矿 石和岩石物料颗粒整形,可根据用户要求,选用不同转子转速和不同电机功率的组合,以满足用户不同的需要。本系列设备可根据用户的要求,很方便地改成石打铁的制砂机,我公司的砂石整形机和制砂机大部分零件可以互通互换。
       PSZ系列砂石整形机由主体、进料管、衬架、轴系、转子及电动机组成,在物料入口两侧安装有空 气循环装置,使转子旋转所产生的风和粉尘在机器内部循环,以减少粉尘污染。而高速旋转的转子,由于精确地调整了平衡,从而实现了低噪音、低振动。由于采用了特殊的耐磨件,延长了转子内易损件的使用寿命。

       PSZ Series Shaping Machine is developed by our company. It is suit for crushing all kinds of rock material which compression strength less than 300 MPa into cubes. According to different needs, the rotor speed and the electrical power can be arbitrar chosen.Some parts of SCBL series can be remodeled into SX series easily.
       PSZ Series Sand Shaping Machine is composed of feeding pipe,shaft,rotor and motor.Air-cycle unit is assembled on two sides of feeding port,which can prevent dust from discharging outside.The rotor going round and round at a high speed produce less noise and vibration .Because we select special,life of the rotor is prolonged.
 
产品特点Features:
■优异的整形性能
■耐磨件数量少,使用寿命长,更换方便,运行成本低
■低噪音、低振动、粉尘少、符合要求
■     Excellent performance;
■     Longer life,lower cost;
■     Less noise,vibration and dust.
 
技术参数表I Technical Date
 
 

型号

进料粒度上限  (mm )

线速度  (m/s )

处理量  (t/h)

电机功率  (kw )

重量(kg )

外型尺寸(mm )

PSZ-1000

40

45

133-174

110×2

17500

5710×2880×3150

40

50

181-220

132×2

17500

5710×2880×3150

PSZ-1200

40

45

185-240

132×2

18300

5710×2880×3150

40

50

220-260

160×2

18300

5710×2880×3150

40

50

255-300

185×2

18300

5710×2880×3150

 

 

 

注:1、以上处理量是在抗压强度为150-160MPa,堆密度为1.6t/m3,水分不大于1.5%的条件下得出。
2、给料均匀、连续。
3、上表所列是可以破碎物料的给料尺寸,但从破碎率和易损件的寿命考虑,希望提供< 40mm的物料。
Note:1.Above data is get under the condition that compression strength is 150-160 MPa and pile density is 1.6t/m3,and water content does not exceed 1.5%.
2.Feeding is continuous and even.
3.In view of output and service life of damageable parts, it is better to feed material less than 40 mm.
 

上一页:PS制砂机
相关产品
猜您感兴趣的

Copyright © 2006-2019 江苏中矿重型装备有限公司 版权所有 苏ICP备2022047224号-11

苏公网安备 32062102000318号