咨询热线: 400-600-6466

振动筛

PS制砂机

丁宝勤 13906276368(技术) 周龙泰 13606279370(商务)

电话:0513-88400999 传真:0513-88400998 邮箱:jszk@vip.163.com

 ps制砂机



产品描述:
       PS系列制砂机是主动将玄武石、鹅软石、安山石、花岗岩等骨材破碎,用干式法生产人工砂。本 系列制砂机由机械本体,进料管,反击板,带有转子的立轴以及电动机构成。在机械本体内部安装的反 击板,由特殊高铬铸铁制成,耐磨性强,并不用螺栓紧固、更换方便。在物料投入口的两侧,安装有空 气循环装置,使转子旋转所产生的风,在循环装置内循环,以减少排到外面的灰尘量。转子装有耐磨套 衬垫板,以增加寿命,并可以减少机械本体磨损部件的数量,降低了运行成本。高速旋转的转子,由于 调整了平衡,从而实现了低噪音,低振动。

      PS series Sand Marking Machine is used for crushing, pebble, andesite, granite etc into manufactured sand by dry method. This series Sand Marking Machine consists of body, feeding tube, impacting plate. vertical shaft rotor and motor,The impaction plate is made from special high-Cr cast with high wearing property, fastening without bolts. easier replacing. Equipped with air circling unit reducing dust discharging. The rotor fitted with wearing pad to prolong service life, to reduce quantity of damageable parts and to reduce running cost. The high speed rotor is balanced to realize lower noise and lower vibration.


PS系列制砂机破碎原理 
      待破碎物料从顶部的物料投入口投入,落到高 速旋转的转子中心部位。落下的物料在转子的强大 离心力作用下,以高速被抛出,撞击到主机内部的 反击板被击碎。在安装反击板时,使抛出的物料与 反击板成直角撞击,以使发挥它优异的破碎性能。 被粉碎的人工砂,从制砂机的下部排除机外。

       The material to be crushed is fed into machine from the feed opening of top,and fall down onto the central section of rotor rotating with high speed.Then it is thrown out with high speed by the strong centrifugal force of rotor .colliding with the impacting plate and crushed.The installed impacting plate shall be colliding with material to be crushed in right angle giving full play of excellent crushing performance.The manufactured sand with proper size is discharging out below the machine. 
 


产品特点Features
        ■优异的破碎性能;
        ■运行成本低:易损件少。特殊高铬铸铁或超硬合金制的易损件使用寿命长。反击板可以上下颠倒再使用的同时,因安装位置还可以调整,因此制砂的成品率局。易损件更换方便;
        ■可以达到降低公害的目的:低噪音及低振动。排泄到外面的灰尘少。

Excellent crushing performance;
Low running cost:Less damageable parts.Long service life of damageable parts(made from special high-Cr cast iron or hard alloy).Impacting plate may be adjusted and up side-down remounted.so the productivity higher.Easily replacing of damageable parts;
Environment friendly:Lower noise and lower vibration.Less dust discharging out.

 


■技术参数表I Technical Date

型号

最大给料尺寸  (mm )

转子的外径 
(mm )

转子的圆周速度  (m/s )

电机功率  (kw)

处理能力 
(t/h)

重量  (kg )

外型尺寸(mm )

PS-1000

30

1040

60

132×2

180

17800

 5710×2880×3150

160×2

210

70

110×2

130

132×2

170

PS-1200

35

 

60

132×2

230

18500

5710×2880×3150

 

160×2

260

1235

185×2

280

70

132×2

200

 

160×2

240

 

185×2

260

 注:上表的能力是指堆密度为1.6t/m3的一般砂岩,安山岩作为破碎物料的情况下,数据会因物料的性质,水分等变化而变化。上表中所列的是可以破碎物料的最大给料尺寸,但从破碎效率和易损件的寿命考虑,希望提供<15mm (宽度尺寸)的物料。

Note:the value shown on above table is based on bulk of 1.6t/m3and taking andesite as example,the actual production may depend on actual material. moisture etc.In view of output and service life of damageable parts,it is better to feed material that 15 mm(width size).

上一页:直线振动筛
下一页:PSZ砂石整形机
产品关键词:PS制砂机 制砂机
相关产品
猜您感兴趣的

Copyright © 2006-2017 江苏中矿重型装备有限公司 版权所有 苏ICP备13032710号-1